|
| Specialized Machine Tooling System |
|
| Stub Holder |
|
Quick-change holder using stub drilling with high rigidity and short length drill, spindle and holder.
ＫＨ－Ｅ
・Not need any special parts for installation
・Available light marching with endmill by locking structure.
・Using high accuracy nut and collet, runout less than 10um at 4D point
ＫＨ－ＥＣ
・Available light marching with endmill by locking structure.
・Corresponds to the high pressure coolant(KH-EC1) and low pressure coolant(KH-EC2)
・Need coolant pin
ＫＨ－Ａ
・Not need any special parts for installation
・Strong holder with the thrust loading.
ＫＨ
・Not need any special parts for installation
・Available the applying to narrow part by slim O.D.
ＫＤ
・High rigidity by separately structure of applied part and drive
・Need a finger collet assembly
ＫＤ－Ｔ
・Remove shaking of radial direction installing taper guide between taper surface and holder.
・Corresponds to processing of large fluctuating load
・Need a finger collet assembly
ＫＨ－Ａ－ＮＬ( For tapping)
・Not need any special parts for installation
・Protrusion length adjusting function
・Quick-change function
ＫＤ－ＮＬ（ For tapping）
・Protrusion length adjusting function
・Quick-change function
・Need a finger collet assembly
>>Troubleshooting
 Dimensions（ＰＤＦ）
|
|
|
| Stub Tapper |
|
Really short O.D. by short shank and short protrusion length design
ＫＴＰ
・Short length of shank and O.D.
・Easy spindle design and processing
・Radial float mechanism
・Quick-change function
ＫＴＬ
・Short length of shank and O.D.
・Easy spindle design and processing
・Length compensation mechanism
・Quick-change function
ＫＴＬＰ
・Short length of shank and O.D.
・Easy spindle design and processing
・Radial float mechanism
・Length compensation mechanism
・Quick-change function
Dimensions（ＰＤＦ）
|
|
|
| Tapping Chuck |
|
Tapping processing to perform with tap adaptor.
ＷＦ
・Slim chuck diameter
・Quick-change function
ＷＦＰ
・Slim chuck diameter
・Quick-change function
・Radial float mechanism
ＷＦＬ
・Slim chuck diameter
・Quick-change function
・Length compensation mechanism
ＷＦＬＰ
・Slim chuck diameter
・Quick-change function
・Radial float mechanism
・Length compensation mechanism
ＷＦＬＫ・Ｊ
・The world's shortest protrusion length
・Quick-change function
・Length compensation mechanism
ＷＬ
・The world's slim tapping chuck
・No need tap adaptor
・Length compensation mechanism
ＷＳＬ
・The world's slim tapping chuck
・No need tap adaptor
・Length compensation mechanism
・Safety torque mechanism
>>Troubleshooting
Dimensions（ＰＤＦ）
|
|
|
| Tap Adapter |
|
Tap is maintained, it installs in tapping chuck, and it uses it.
ＷＥ/ＷＥＲ
・Quick-change function
ＷＥＳ・Ｂ/ＷＥＳＲ・Ｂ
・Quick-change function
・Safety torque mechanism
ＷＥＣ/ＷＥＲＣ
・Quick-change function
・Cemented carbide tap
ＷＥＮＣ/ＷＥＮＲＣ
・Quick-change function
・Cemented carbide tap
・Length adjusting function
ＷＥＮ・Ｂ/ＷＥＮＲ・Ｂ
・Quick-change function
・Length adjusting function
ＷＥＳＮ・Ｂ/ＷＥＳＮＲ・Ｂ
・Quick-change function
・Safety torque mechanism
・Length adjusting function
ＷＥＮ・Ｂ－Ｖ
・Quick-change function
・Extension size
・Length adjusting function
ＷＥＳＮ・Ｂ－Ｖ
・Quick-change function
・Extension size
・Safety torque mechanism
・Length adjusting function
ＷＥＮＥ・Ｂ/ＷＥＮＥＲ・Ｂ
・Quick-change function
・Extended size
・Length adjusting function
ＷＥＳＮＥ・Ｂ/ＷＥＳＮＥＲ・Ｂ
・Quick-change function
・Extended size
・Safety torque mechanism
・Length adjusting function
Dimensions（ＰＤＦ）
|
|
|
| Drilling Chuck |
|
Quick-change the adaptor at dedicated machines, transfer machines, drilling machines & multi-drill head. SPINDLE : JIS(B86110) Drilling spindle
ＡＳＢＡ
・One hand quick-change function of adaptor
ＡＳＢＡＪ
・One hand quick-change function of adaptor
・High rigidity
ＡＳＢ
・Quick-change function of adaptor
ＡＳＢＶ
・Quick-change function of adaptor
・Slim O.D.
・Short protrusion length O.D.
Dimensions（ＰＤＦ）
|
|
|
| Adjustable Adapter Ｄ/Ｆ |
|
Adaptor to chuck the Morse taper drill. Available to quick change to spindle the drilling chuck with SSMA nut. Drill socket to use drilling and counter boring.
Dimensions（ＰＤＦ）
|
|
|
| Endmill Chuck ＥＭ・Ａ |
|
Sub holder to use the milling chuck and keep the endmill with collet. Holder to use endmill processing with EMC and EMS collet for adjusting to diameter size of endmill.
Dimensions（ＰＤＦ）
|
|
|
| Straight Drill Chuck ＤＣ/ＥＤ・Ａ/ED for small diameter |
|
Adaptor to chuck the straight shank drill. Available to quick change the drilling chuck with SSMA nut.
Dimensions（ＰＤＦ）
|
|
|
Floating Holder FH/GPK-GP
|
|
Use to the high accuracy reaming with the dedicated machines and the transfer machine.
Dimensions（ＰＤＦ） |
|
|
