Awesome Chucking Torque:
2-4 times higher than collet chucks and hydraulic chucks.
Outstanding Stiffness
Reduction of Cutting Tool Cost:
Excellent runout accuracy prolongs the tool life
Center-thru coolant adaptability |
 |
Ideally Slim Chuck
As there is no clamping nut or screw,
the outside diameter is very small, optimum for machiningin narrow areas.
Reduction of Cutting Tool Cost:
In place of cutting tools with long shanks,
you can use standard cutting tools,
resulting in cost reduction.
Center-thru coolant adaptability
|
 |
The chucking torque is 2 - 4 times higher than that of Collet Holders
|
 |
| Cutting tools with short shanks can be used.
Increased rigidity, feed rates, speed, and longer tool life is acheved.
|
 |
The symmetrical shape is ideal for high speed rotation.
Max. Rotation Speed
Standard types・・・・・・・・・・20,000 min-1
High-balanced type・・・・・・・30,000 min-1and over
1.High balanced type（SRD-G,SRK-G,SRS-G）is available upon request.
2.Maximum RPM depends on machine capabilities, shank size and tool length and diameter. |
 |
| Heating Device |
| Magnetic Induction Heating Device IH1500 |
|
・Regardless of the material of holder, products from other companies can also be heated.(Nonmagnetic steel holders can also be heated.)
・Heating and cooling work can be performed at the same time.
・Compact device size saves space.
・Extended length shrink-fit chucks can also be used.
>>Details
|
| Magnetic Induction Heating Device IH3200-N |
| Insertion and removal of cutting tools can be done within 5 seconds |
Induction heating enables a short-time detachment / attachment of the tool. |
 |
| Speedy cooling with in 60 seconds |
Circulating water in the Cooling Adaptor enables instant cool down of a heated chuck.
| Carbide shank, HSS shank can be installed and removed |
With the combination of the Magnetic Induction Heating Device and SRD Shrinker Chuck, chucking and removal of HSS tools（shank diameter 12.0mm and above）are enabled.
| Shrink fitting is possible also with a long shrinker chuck |
Shrink fitting up to 410 mm from the gauge line to the cutting edge is possible.
| Economy type Heater SRK-HA1 / SRK-HB2 |
|
・Space-saving design
・Affordable price
・Operated by 100V（1200w） / 200V , 230V（3000W）
・No need for air piping |
|
|
