Easy! Quick! Simple Clamping!! |
Simple one hand clamping operation with a hex wrench.
Numerous ID sizes in 1mm increments (6mm - 32mm) |
ID sizes of 6mm - 16mm were recently standardized in 1mm.
20% more clamping force than a collet holder! |
NT original "Dual clamping points system" for higher precision. |
 |
Dual clamping with new slit sleeve design
for even pressure. |
Tool pre-set without height offset |
Length adjustment function |
 |
Cutting tool height can be
adjusted on the side with a hex
wrench.@(BT shank) |
 |
A variety of PHC-collet sizes are available.
 |
The holder's inner shank can be
protected from damage using a
PHC-collet.
For higher precision chucking, align £ markings on a PHC holder and collet. |
 |
| Available in various spindle interfaces. |
| Various cutting applications |
|
