|
|
| Milling Chuck HIgh Balanced CT・S-E |
|
Super tite-lock milling chuck of the high balance type realizing highest rotation speed, 25,000min-1.
＜Major feature＞
・High speed & high speed feeding milling processing
・Corresponds to the center through coolant
 Dimensions（ＰＤＦ） |
|
|
| Collet Holder HDC・Ａ |
|
Universal collet holder of high accuracy and high gripping power using double taper collet.
＜Major feature＞
・Endmill, drill and reaming processing for middle and small size.
・Corresponds to the center through coolant with coolant collet(FDC-OH,FDC-C and FDC-MS).
Dimensions（ＰＤＦ） |
|
|
| Collet Holder for Small Diameter ERC |
|
Collet holder of slim design realizing the high balance by total finishing processing. Best for the processing of a narrow part.
＜Major feature＞
・Small diameter endmill, drill & reaming processing
・Corresponds to the center through coolant with coolant collet(ER-OH and ER-C).
Dimensions（ＰＤＦ） |
|
|
| Collet Holder HIgh Balanced GDC・A |
|
Collet holder with holder balance realizing the high speed and the high accuracy processing
＜Major feature＞
・High speed process of endmill, drill and reaming
・Corresponds to the center through coolant with coolant collet(FDC-OH,FDC-C and FDC-MS).
>>Details
Dimensions（ＰＤＦ） |
|
|
| "R" Zero Holder HDZ |
|
Collet holder of adjusting type setting smallest runout accuracy of a tool tip, zero(0).
＜Major feature＞
・High accuracy finishing by endmill, drill & reaming
・Corresponds to the center through coolant with coolant collet(FDC-OH,FDC-C and FDC-MS).
>>Details
>>Video Library
Dimensions（ＰＤＦ）
|
|
|
| Shrinker Chuck SRS / SRD / SRK |
|
The chucking area of a holder is heated up and the chucking diameter is expanded. Then, a cutting tool is inserted into the holder. What the holder is cooled, the chucking diameter shrinks to its original size and holds the tool firmly.
SRS : Slim type
SRD : DIN Standard type
SRK : Heavy type
＜Major feature＞
・Endmill,Drill & Reaming
・Corresponds to the center through coolant.
>>Details
Dimensions（ＰＤＦ）
|
|
|
| Synchuro Tapping Chuck TP0 |
|
Syncro tapping chuck by chucking the tap shank with collet.
＜Major feature＞
・High speed & high accuracy tapping
・Synchronous tapping processing
・Slipping prevention of tap by tongue drive method.
・Length adjusting function<
Dimensions（ＰＤＦ） |
|
|
| Synchuro Tapping Chuck STP |
|
Syncro tapping chuck with quick-change function using tap adaptor
＜Major feature＞
・For syncro tapping processing
・Quick-change function
・Available for exclusive use adaptor (STC) & tap adaptor(WE,WEN)
・Corresponds to the center through coolant(Use STC).
・Quick-change function(Use STC)
Dimensions（ＰＤＦ） |
|
|
| Tapping Chuck TP1 |
|
Tapping chuck with quick-change function using tap adaptor
＜Major feature＞
・The world's shortest protrusion length
・Quick-change function
・Length compensation mechanism
・Best for the roll tap (rolled tap) by strong compression pressure.
TP1 Dimensions（ＰＤＦ）
Tap Adapter Dimensions（ＰＤＦ) |
|
|
| Tapping Chuck WFLK |
|
Tapping chuck with quick-change function using tap adaptor
＜Major feature＞
・The world's shortest protrusion length
・ Quick-change function
・Length compensation mechanism
Dimensions（ＰＤＦ） |
|
|
| Auto depth control Tapping Chuck TP3B |
|
Tapping chuck of auto depth control function processing high accuracy of tapping depth.
＜Major feature＞
・Auto depth control
・Best for Blind holes & tapered screws
・Quick-change function
・Length compensation mechanism
Dimensions（ＰＤＦ）
|
|
|
| Self-reversing Tapping Chuck TP4E/TP4EC |
|
Tapping chuck of self reversing function reaching the specified tapping depth only clockwise rotation .
＜Major feature＞
・Self reversing function
・Auto depth control
・Corresponds to the center through coolant(TP4EC only).
・Slipping prevention for tapping by tongue drive method.
Dimensions（ＰＤＦ） |
|
|
| Keyless Drill Chuck KLD |
|
Drill holder chucking the open/close the nail by tight-up ring.
＜Major feature＞
・Straight shank drill processing less than φ13.
・ Universal chucking system
Dimensions（ＰＤＦ）
|
|
|
| Morse Taper Holder MTA / MTB |
|
Holder chucking the Morse taper tool.
MTA : Morse taper shank with tongue
MTB : Morse taper shank with draw-in screw
＜Major feature＞
・Morse taper shank drill and Reaming
Dimensions（ＰＤＦ）
|
|
|
| Side Lock Holder SLA / SL2 / SLB |
|
Holder chucking the tool by side lock
＜Major feature＞
Straight shank endmill with flat tilt & cutter with handle.
Dimensions（ＰＤＦ）
|
|
|
| Face Mill Arbor FMH / FMA / FMB / FMC |
|
Arbor attaching the front miller cutter
＜Major feature＞
Face mill cutter
Dimensions（ＰＤＦ） |
|
|
| Shell End Mill Arbor SM1 / SMA / SMB /SMC |
|
Arbor attaching the shell endmill
＜Major feature＞
Cutter arbor for shell endmill
Dimensions（ＰＤＦ） |
|
|
| Side Cutter Arbor SCA |
|
Arbor attaching side cutter
＜Major feature＞
Arbor for side cutter
Dimensions（ＰＤＦ） |
|
|
| Jacobs Taper Arbor JTA |
|
Arbor attaching drill chuck
＜Major feature＞
Arbor for Jacobs taper drill chuck
Dimensions（ＰＤＦ） |
|
|
| Multi bore Tooling system |
|
The built-p (assembly type) tooling system in which the conventional integrated tooling is divided into the master shank and the head, enabling to attach the extension and the reduction between the master shank and the head according to need.
Twin Cutter Head ＴＷＡ/ＴＷＢ
For rough machining on though holes
Single Cutter Head SGA/ＳＧＢ
For rough machining on blind holes and though holes
Fine Boring Head ＦＢＡ/ＦＢＢ
For finish machining on blind holes and through holes
Micro Fine Boring Head ＰＦＢ
For superfine finish machining on blind holes and through holes
Signle Fine Boring Head ＳＢＡ
For rough machining on blind holes and through holes with small diameter
Curtridge Boring Head ＢＣＡ・Ｗ
For finish machining on blind holes and through holes
Curtridge Boring Head ＢＣB・Ｗ
For finish machining on through holes
Chamfering Ring ＭＲ
For Chamfering on boring holes
Collet Holder Head ＨＤＣ・Ｗ
For drill and endmill
Jacobs Taper Head ＪＴ・Ｗ
For attaching the drilling chuck
Side Lock Head ＳＬ2
For drill and endmill
Face Mill Arbor Head ＦＭＡ・Ｗ
For milling processing
Shell End Mill Arbor Head ＳＭ・Ｗ
For milling processing
Reduction ＲＥ
Used for joining the master shank with the head when decreasing the shank size to some degree in accordance with the boring diameter in order to attach a small head
Extention ＥＸ
Used for joining the master shank with the head when extending the protrusion length of the tooling in accordance with the boring depth
Dimensions（ＰＤＦ） |
|
|
| Hyper Spind HP / HP-H |
|
Tool holder with the best cutting condition by speeding up the point spindle via built-in gear in the holder.
HP : Max. rotation speed 20,000min-1
HP-H : Max. rotation speed 30,000min-1
＜Major feature＞
Small diameter endmill, drill
Dimensions（ＰＤＦ）
|
|
|
| Coolant Holder |
|
Tool holder using the machining tool with oil hole
＜Major feature＞
Drill with oil hole & tooling
Dimensions（ＰＤＦ） |
|
|
| Angle Head AH / AHS / AHL |
|
The flex angle head is adjustable to any angle from 0-90degree of machining main axially.
AHS/AHL : Flexible type (0-90 degree)
AH45/AH90 : Solid type(45 or 90degre), Option : Center through coolant
＜Major feature＞
Drill, Tap, Step drill and counter bore drill
Dimensions（ＰＤＦ）
|
|
|
| Multiple Head MUD / MUT |
|
Holder to process plural hole all at once. Man-hour is reduced, and it leads to improvement of productivity.
MUD : Drill
MUT : Tap
＜Major feature＞
Drill, Tap, Step drill and counter bore drill
Dimensions（ＰＤＦ）
|
|
|
