|
|
| Chamfering Cutter ＦＭ |
|
・Chamfering, Countersinking, Cornering
・Because of the shank that is thin, it is possible to get deep into the hole to do the chamfering.
・With a throw away insert chamfering of a diameter as small as 2 mm is possible.
 Dimensions（ＰＤＦ） |
|
|
| Back Chamfering Cutter ＢＭ |
|
・A special throw away insert type cutter geared to back chamfering which is intended for use in conjunction with machining center capable of tool offsetting.
・Economical by the throw-away chip type
Dimensions（ＰＤＦ） |
|
|
| Back Spot-facing Cutter ＢＺ |
|
・ A special throw away insert type cutter geared to back-counter boring which is intended for use in conjunction with machining center capable of tool offsetting.
・Economical by the throw-away chip type
Dimensions（ＰＤＦ） |
|
|
| Gold Chamfering Drill |
|
・C Chamfering, de-burring
・Suitable for machining soft, tough materials ( Aluminum etc)
・Durability improves by the coating processing.
・ Economical by re-polishing
Dimensions（ＰＤＦ） |
|
|
| Chamfering Drill |
|
・Chamfering, de-burring
・ Suitable for machining soft, tough materials ( Aluminum etc)
・Economical by re-polishing
Dimensions（ＰＤＦ） |
|
|
| NEW Chamfering Drill |
|
・ Chamfering, de-burring, countersinking
・ Suitable for machining materials that are hard but brittle
・Durability improves by cobalt HSS used
・Economical by re-polishing
Dimensions（ＰＤＦ） |
|
|
| Chamfering Holder |
|
・Economical by throw-away chip type
・ Aluminum and iron can be processed by chip replacing.
（No.504 Steel,Cast iron）
（No.510 Alminium, Mild steel）
Dimensions（ＰＤＦ） |
|
|
